Megasquirt for V8 engines - Spark Only Kits

Megasquirt V8 "Spark Control Only" Kits

Kits are Engine specific and contain everything required for a installation to control Spark ONLY, meaning you retain either your Cars or ECU for Fuelling, We can if you require at a later date supply the remaining parts for you to then upgrade to Fuel as well. For a Full Install for BOTH Spark AND Fuel see "MS S'nE Kits" section.

All Engine Specific Brackets - Trigger Wheel, Twin Coil Pack Mounting, & VR Sensor Kits
Used - 2 x Coil Packs, EDIS 8 & Pigtail
New - VR Sensor, 2x Coil Power Plug Kits, Coil Plug Ends Kit, ECU to PC Cable, Shunt Unit
Megasquirt V8 “Spark Control” Loom Kit + Megasquirt V8 Build CD
A Dumpy Dizzy is NOT Supplied in any Kits EXCEPT the Serpentine which has to have one ! -( Otherwise add from the engine specific pages if wanted.)
ECU – Choose either Unbuilt or Fully Built & Programmed ready to run (both come with ECU CD*)
ECU CD* – All software, back up Program for engine, all wiring Diagrams & Instructions
SAVE ! - Cheaper than buying all the above individually & with Insured Delivery - to your door

	Kits with unbuilt ECUs		Kits with fully built ECUs
3.5 V Belts Kit*	Out of Stock	£614	Out of Stock	£745
3.9 V Belts Kit	Out of Stock	£616	Out of Stock	£747
3.9 Serpentine Kit	Out of Stock	£620	Out of Stock	£745
4.6 Serpentine Kit	Out of Stock	£542	Out of Stock	£673

*We don’t recommend using the Flapper Injector System as it is. On these systems we suggest you find a 'Hotwire' Inlet & Injector assembly and upgrade. These can be sourced cheaply, and offer a vast improvement over the 'Flapper' items.

Built Megasquirt V8 ECUs are Configured for EDIS 8 & PWM control. PWM Units are sometimes available in 'Generic Parts' (used) but not included in any of the above kits. I am currently working on a complete PWM Kit, but can advise on parts you would require, once fitted the Megasquirt V8 Built ECU is pre programmed and the PWM will be active.